runtuyan DWMG dioperasikeun sacara manual valves arah anu tipe langsung valves arah, Ieu bisa ngadalikeun mimiti, eureun & arah aliran cairan.Runtuyan ieu kalawan detent atawa balik spring sadia.
| Ukuran | 6 | 10 | 16 | 22 | 25 | 32 |
| Laju aliran (L / mnt) | 60 | 100 | 300 | 450 | 650 | 1100 |
| Tekanan operasi (Mpa) | A, B, P palabuhan minyak 31,5 T palabuhan minyak16 | |||||
| Beurat (KGS) | 1.5 | 4.4 | 8.9 | 12.5 | 19.4 | 39.2 |
| Awak klep（Bahan）Perlakuan permukaan | casting permukaan phosphating | |||||
| Kabersihan minyak | NAS1638 kelas 9 jeung ISO4406 kelas 20/18/15 | |||||
Kurva ciri DWMG6
Kurva ciri DWMG10
Kurva ciri DWMG16
Kurva ciri 4DWMG25
DWMG6/10 lambang Spool
DWMG6 Subplate Instalasi Dimensi
DWMG10 Subplate Instalasi Dimensi
1. klep urang set screw
4 tina M6 × 50 GB / T70.1-12.9
Torsi tightening Ma = 15,5Nm.
2.O-ring φ16×1.9
DWMG16 Subplate Instalasi Dimensi
screw set klep urang
4 tina M10 × 60 GB / T70.1-12.9 Tightening torsi Ma = 75Nm.
2 tina M6 × 60 GB / T70.1-12.9 Tightening torsi Ma = 15,5Nm.
O-ring pikeun PTAB Port: φ26×2.4
O-ring pikeun XYL Port: φ15×1,9
DWMG22 Subplate Instalasi Dimensi
screw set klep urang
6 tina M12 × 60 GB / T70.1-2000-12.9 Tightening torsi Ma = 130Nm.
O-ring pikeun PTAB Port: φ31×3.1
O-ring pikeun XY Port: φ25×3.1
DWMG25 Subplate Instalasi Dimensi
screw set klep urang
6 tina M12 × 60 GB / T70.1-12.9 Tightening torsi Ma = 130Nm.
O-ring pikeun PTAB Port: φ34×3.1
O-ring pikeun XY Port: φ25×3.1
DWMG32 Subplate Instalasi Dimensi
screw set klep urang
6 tina M20 × 80 GB / T70.1-2000-12.9 Tightening torsi Ma = 430Nm.
O-ring pikeun PTAB Port: φ42×3
O-ring pikeun XY Port: φ18.5×3.1
